Connecting The Printer; Network Connection - Ricoh SP 3400N Operating Instructions Manual

3. Connecting the Printer

Network Connection

Follow the procedure below to connect the printer to a computer through a net-
work. Prepare the hub and other network devices before connecting the
10BASE-T or 100BASE-TX cable to the printer's Ethernet port.
R CAUTION:
• Do not connect the Ethernet port of the printer to a network that may supply
excess voltage, such as a telephone line. Doing so may result in fire or elec-
tric shock.
Important
❒ Use shielded Ethernet cable. Unshielded cables create electromagnetic inter-
ference that could cause malfunctions.
❒ The Ethernet cable is not supplied with this printer. Select your cable accord-
ing to the network environment.
A
Connect the Ethernet cable to the Ethernet port.
B
Connect the cable to the network (e.g., a network hub).
Reference
For details about network environment settings, see Software Guide.
For details about installing printer drivers for network connection, see
Software Installation Guide for Network Connection.
BXG026
27