Ricoh AP410 Setup Manual page 102

Configuration
❒ The default setting is "Active".
E
Press the {U} or {T} key to display [SCSI print], and the press the {# Enter}
key.
F
Press the {U} or {T} key to select either [Active] or [Not Active], and then
press the {# Enter} key.
SCSI print:
*Active
After the settings are made, about two seconds later, the screen returns to the
IEEE 1394 setting menu.
G
Set [Bidi-SCSI print] in the same way.
H
Press the {On Line} key.
The initial screen appears.
Ready
I
Print a configuration page to confirm the settings made.
For details about printing the configuration page, see p.33 "Test Printing".
102