Application Interfaces; Usb Interfaces - Quectel SC690A Series Hardware Design

4

Application Interfaces

4.1. USB Interfaces

The module provides one USB interface(s): USB Type-C. The USB interface complies with the USB
3.1 Gen1 and USB 2.0 specifications, and supports SuperSpeed (5 Gbps) for USB 3.1 Gen1, High-
Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) for USB 2.0. The USB interface
supports USB OTG function, and is used for AT command communication, data transmission,
software debugging and firmware upgrade.
Table 10: Functions of the USB Interface
Functions
Data communication with external AP
AT command communication
Data transmission
GNSS NMEA output
Software debugging
Firmware upgrade
Voice over USB
NOTE
"√" means supported; "-" means not supported.
SC690A_Series_Hardware_Design
Smart Module Series
√
√
√
-
√
√
-
44 / 105