4.12. Sensor Interfaces
The module supports communication with sensors via I2C interface, and it supports various sensors
such as acceleration sensor, gyroscopic sensor, compass, light sensor, temperature sensor, etc.
Table 25: Pin Definition of Sensor Interfaces
Pin Name
SENSOR_I2C_SCL
SENSOR_I2C_SDA
GPIO_35
GPIO_34
GPIO_33
GPIO_32
4.13. Flash Interfaces
The module supports 2 flash LED drivers, with maximal output current up to 1.5 A per channel. The
default output current is 1000 mA in flash mode and 300 mA in torch mode.
Table 26: Pin Definition of Flash Interfaces
Pin Name
Pin No.
FLASH1_LED
26
FLASH2_LED
228
SC690A_Series_Hardware_Design
Pin No. I/O
Description
131
OD
I2C clock signal of external sensor
132
OD
I2C data signal of external sensor
Can be multiplexed into ALPS_INT,
253
DI
used as light sensor interrupt
Can be multiplexed into MAG_INT,
254
DI
used as geomagnetic sensor interrupt
Can be multiplexed into GYRO_INT,
137
DI
used as gyroscopic sensor interrupt
Can be multiplexed into ACCEL_INT,
237
DI
used as acceleration sensor interrupt
I/O
Description
AO
Flash/torch driver output
AO
Flash/torch driver output
Smart Module Series
Comment
1.8 V power domain.
1.8 V power domain.
Comment
Support flash and torch modes.
2 × 1.5 A (maximum 1.5 A
combined)
67 / 105