GSM/EVDO/CDMA/UMTS/TD-SCDMA/LTE
Wi-Fi/Bluetooth
⚫
NOTE
It is recommended to use a passive GNSS antenna when LTE B13 or B14 is supported, as the use of
active antenna may generate harmonics which will affect the GNSS performance.
5.6. RF Connector Recommendation
If you use RF connector for antenna connection, it is recommended to use the U.FL-R-SMT connector
provided by HIROSE.
SC690A_Series_Hardware_Design
Active antenna embedded LNA gain: 17 dB
VSWR: ≤ 2
Efficiency: > 30 %
Gain: 1 dBi
Max input power: 50 W
Input impedance: 50 Ω
Polarization: Vertical
Cable insertion loss:
< 1 dB: LB (<1 GHz)
< 1.5 dB: MB (1–2.3 GHz)
< 2 dB: HB (> 2.3 GHz)
VSWR: ≤ 2
Gain: 1 dBi
Max Input Power: 50 W
Input Impedance: 50 Ω
Polarization Type: Vertical
Cable Insertion Loss: < 1 dB
Smart Module Series
87 / 105