Event
Recording triggered by all event triggered alarm.
2. Select a camera in CameraNo.
3. Check Enable.
4. Configure the recording schedule.
Edit
a. Click Edit.
Schedule
b. Select a day to configure in Weekday.
c. To set an all-day recording schedule, check All Day and select schedule type.
d. To set other schedules, uncheck All Day, and set Start/End Time and schedule
e. Click OK to save the settings and go back to upper level menu.
Draw
a. Click to select schedule type as Continuous or Event.
Schedule
b. On the table, drag the mouse on the desired period to draw a colored bar.
5. Click Apply.
Network Video Recorder User Manual
type.
Note
Up to 8 periods can be configured for each day. And the time periods cannot
be overlapped with each other.
Figure 5-14 Edit Schedule
38