HIKVISION HiWatch Series User Manual page 41

Add Network Camera Manually
Before You Start
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct.
●
Ensure the network camera is activated.
●
Steps
1. Go to Configuration → Camera → IP Camera .
2. Click .
3. Set network camera parameters, including IP address, protocol, management port, etc. You can
check Use IPC Active Password to use the device password to add network camera(s).
4. Optional: Click Add More to add another network camera.
5. Click OK.
Edit Connected Network Camera
You can edit the IP address, protocol and other parameters of the added network cameras.
Steps
1. Go to Configuration → Camera → IP Camera .
2. Click to edit the selected camera.
Channel Port
If the connected device is an encoding device with multiple channels, you can select the
channel port No. to choose a connecting channel.
3. Click OK.
Network Video Recorder User Manual
Figure 5-8 Add Network Camera
28