HIKVISION HiWatch Series User Manual page 50

Configure Event Recording
You can configure the recording triggered by the motion detection, line crossing detection, and
intrusion detection.
Steps
1. Go to Configuration → Event → Smart Event .
2. Configure the event detection and select the channels to trigger the recording when an event
occurs.
3. Go to Configuration → Record → Parameter .
4. Set the continuous main stream/sub-stream recording parameters for the camera. Refer to
Configure Recording Parameter for details.
5. Go to Configuration → Record → Schedule .
6. Select recording type as Event. Refer to Edit Schedule for details.
Edit Schedule
Steps
1. Go to Configuration → Record → Schedule .
Continuous
Continuous recording.
Network Video Recorder User Manual
Figure 5-13 Recording Schedule
37