HIKVISION HiWatch Series User Manual page 76

Network Video Recorder User Manual
Figure 6-18 Alarm Output
2. Click of a desired alarm output.
3. Customize Alarm Name.
4. Select Dwell Time.
Figure 6-19 Edit Alarm Output
5. Set Settings as Input to enable the function.
6. Set the arming schedule. Refer to Configure Arming Schedule for details.
7. Click Apply.
Flashing Light Alarm Output
When light and audio alarm camera is connected, you can set the flashing time, flashing frequency,
and arming schedule of the flashing light alarm.
Before You Start
Light and audio alarm camera is connected.
Steps
1. Go to Configuration → Event → Normal Event → Flashing Light Alarm Output.
2. Click for any row.
3. Set the Flashing Time and Flashing Frequency.
4. Set the arming schedule. Refer to Configure Arming Schedule for details.
63