Steps
1. Go to Configuration → System → Live View → General .
2. Configure the Live View parameters.
Live View Mode
Select the live view window division.
Dwell Time
The time to dwell in a camera before switching to next camera when auto-switch in live view
is enabled.
Event Output
Select the output to show event video.
Full Screen Monitoring Dwell Time
Set the time to show alarm event image.
Enable Audio Output
Turn on/off audio output for the selected video output.
Volume
Adjust the live view, playback, and two-way audio volume for the selected video output
interface.
3. Click Apply.
Network Video Recorder User Manual
Figure 6-2 Live View-General
42