Configure Auto-Switch Of Cameras; Configure Live View Layout; Configure Custom Live View Layout - HIKVISION DS-8600NXI-I8/S Series User Manual

6. Optional: Click

3.2 Configure Auto-Switch of Cameras

You can set the auto-switch of cameras to play in different display modes.
Steps
1. Go to System → Live View → General.
2. Set Video Output Interface, Live View Mode, and Dwell Time.
Video Output Interface
Select the video output interface.
Live View Mode
Select the display mode for live view, e.g., 2*2, 1*5, etc.
Dwell Time
The time in seconds to dwell between switching of cameras when enabling auto-switch. The
range is from 5s to 300s.
3. Go to View Settings to set the view layout.
4. Click OK to save the settings.

3.3 Configure Live View Layout

Live view displays the video image getting from each camera in real time.

3.3.1 Configure Custom Live View Layout

Steps
1. Go to System → Live View → View.
2. Click Set Custom Layout.
3. Click on the Custom Layout Configuration interface.
4. Edit the layout name.
5. Select a window division mode from the toolbar.
Network Video Recorder User Manual
to start live view for all channels, or click to stop all live view channels.
35