HIKVISION HiWatch Series User Manual page 68

Configure Advanced Camera Parameters
You can configure advanced camera parameters like camera IP address, camera password, etc.
Before You Start
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct.
●
Steps
1. Go to Configuration → Camera → Camera .
2. Click .
3. Set camera parameters like IP address, camera password, etc.
4. Click Apply.
Configure Channel Type
You can disable a PoE channel to additionally increase a normal IP channel resource.
Go to Configuration → Camera → Camera → PoE Binding Configuration , and set the PoE channel
as your desire.
Sort Channel Order
Go to Configuration → Camera → Camera . Refer to Sort Channel Order for details.
Configure Remote Settings
Go to Configuration → Camera → Camera . Refer to Configure Remote Settings for details.
Network Video Recorder User Manual
Figure 6-12 PoE Binding Configuration
55