HIKVISION HiWatch Series User Manual page 75

Steps
1. Go to Configuration → Event → Normal Event → Alarm Input .
Note
Local alarm input: Local alarm input is triggered by the external device that connected to the
video recorder's terminal block.
2. Click of a desired alarm input.
3. Customize Alarm Name.
4. Set alarm type as N.O (normally open) or N.C (normally closed).
5. Set Settings as Input to enable the function.
Note
If you set Settings as Nonuse, the alarm input will be disabled. If you set Settings as One-Key
Disarming, the selected linkage method(s) of the alarm input will be disabled.
6. Set the arming schedule. Refer to Configure Arming Schedule for details.
7. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
8. Click Apply.
Alarm Output
Trigger an alarm output when an alarm is triggered.
Steps
1. Go to Configuration → Event → Normal Event → Alarm Output .
Network Video Recorder User Manual
Figure 6-16 Alarm Input
Figure 6-17 Edit Alarm Input
62