3. Set the PTZ camera parameters.
Note
All parameters should be the same as the PTZ camera.
●
For the Coaxitron camera/dome connected, you can select the PTZ protocol to UTC
●
(Coaxitron). Ensure the selected protocol is supported by the connected camera/dome.
The AHD and HDCVI cameras support coaxitron control.
●
Selecting Coaxitron protocol will make other parameters unavailable, including baud rate, data
●
bit, stop bit, parity and flow control.
4. Click OK.
Network Video Recorder User Manual
Figure 2-4 PTZ Parameter
9