Erasing Route Plans - Raymarine GPS navigation Operation Manual

Press theI=j key puts the screen into an Edit condition so you can
INSERT or DELETE waypoints. Notice that two softkeys ILEG and m
(insert) appear on the screen.
To INSERT a Waypoint
For example; to insert a new waypoint between waypoints #006 and #036,
036. If this is where you would like to
new waypoint will now appear between 006,002,036.
To DELETE a Waypoint
To delete a waypoint from a route plan, press thelLEG1 key until the leg
where the waypoint shouid be deleted is displayed. For example; to delete
036. Then pressllto EDIT and pressmqagain to
The
FROM
press theI- key to end the editing session and return to the Display
mode. If you press the[CLEAR[key here (which is normally done on other
menus) you will accidently remain in the EDIT screen and continue deleting
waypoints from the route against your will.

3.9.4 Erasing Route Plans

To ERASE a route plan, select the Route mode with thevlkey.
and then press the
ENTER" will appear. To ERASE the route, presdm{
of heart, pressjjlto abandon the
mode.
3.10 TheplKey
One of the smallest, but most important keys on the NAV 398 is the-1
key. This key controls access to the screens which set up the operating
parameters for the sensors, the display system, and for the navigation
calculations and readouts,
In the Menu pages you will find that the operations are very simple and
direct and the most difficult task will be to remember which menu holds the
OPERATION 334
INSERT
ERASE ROUTE
request and return to the Display
R
E ASE
the new waypoint, Press the
TE #036.
DELE
P r e
message WJRE?
I f y o u h a v e a c h a n g e
s s
R
P ESS