Gas Test; Selection For Display Of Amperes/Wire Feed Speed (Automatic Mode); Lcd Display - Kemppi HiArc M 350A Operating Manual

3.4.4 Gas test

To test the shielding gas flow, press the gas test button once. The shielding gas starts to flow
and stops automatically after 20 seconds.
To interrupt the gas test, press the button again.

3.4.5 Selection for display of amperes/wire feed speed (automatic mode)

EN
A long press (5 secs) of button 11 also switches the display from m/min to amperes.

3.4.6 LCD display

1. Automatic settings
2. Welding parameters
3. Crater fill parameters
14
HiArc M 350A, M 500A
1.
2.
3.