Connecting The Cisco Fm3200 Endo To Networking And Communications Hardware; Terminal Assignments For Power And Data Connectors; Rj45 Ethernet - Cisco FLUIDMESH FM3200 Endo Installation And Configuration Manual

Backhaul FM3200 Endo Cisco Ultra-Reliable Wireless
5.2. Connecting the Cisco FM3200 Endo to networking and
communications hardware

5.2.1. Terminal assignments for power and data connectors

RJ45 Ethernet

The terminal assignments for male RJ45 connectors are as shown in the
image below. With the connector in this orientation, the terminals are
numbered 1, 2, 3, 4, 5, 6, 7 and 8 from right to left.
© 2020 Cisco and/or its affiliates. All rights reserved.
IMPORTANT
Always use outdoor-rated, RF-shielded Ethernet cables when
connecting the Power and LAN ports of a Fluidmesh hardware
device to external hardware.
IMPORTANT
Always use outdoor-rated, RF-shielded Ethernet cables, and
RF-shielded RJ45 male connectors (a typical shielded
connector can be seen in the image below).
Page 33 of 177