Fluidmesh Architecture; Overview; Wireless Network Architectures; The Fluidmax Tdma Protocol - Cisco FLUIDMESH FM3200 Endo Installation And Configuration Manual

Backhaul FM3200 Endo Cisco Ultra-Reliable Wireless

3.2. Fluidmesh Architecture

3.2.1. Overview

Wireless network architectures

Depending on the network design and the type of components used, the
Cisco FM3200 Endo can be used to create wireless network
architectures, including:
• Point-to-point (P2P) links.
• Point-to-multipoint (PTMP) sectors.
• Mesh networks.
• Mobility networks.
• Mixed networks that are capable of using any combination of types
listed above.

The FluidMAX TDMA protocol

Individual radio transceivers can easily be assigned different roles within
the same network, using Fluidmesh's patented FluidMAX™ technology. A
typical example of a general network architecture that uses a combination
of Fluidmesh components is shown below:
FluidMAX™ enables high-performance deployments of outstanding
flexibility. The following section shows how to build point-to-point, point-to-
multipoint and mesh networks using Fluidmesh products.
© 2020 Cisco and/or its affiliates. All rights reserved. Page 15 of 177