Cisco FLUIDMESH FM3200 Endo Installation And Configuration Manual page 117

Ultra-reliable wireless backhaul
Hide thumbs Also See for FLUIDMESH FM3200 Endo:
Table of Contents

Advertisement

Backhaul FM3200 Endo
Cisco Ultra-Reliable Wireless
User
Packet tagged with MVID
Access port rules for incoming packets (Case and Action)
Untagged packet from Fluidmesh device
Untagged packet, VID not configured
Untagged packet, VID configured
Tagged packet with valid VID
Tagged packet with null (0) VID
Access port rules for outgoing packets (Case and Action)
Tagged packet with configured and
allowed VID
Packet from Fluidmesh device
Tagged packet, port VID not configured
Tagged packet with valid but disallowed
VID
Tagged packet with null (0) VID
Access port rules for incoming packets with unit in Smart Mode (Case and
Action)
Untagged packet
Tagged packet (any VID, no checks)
Access port rules for outgoing packets with unit in Smart Mode (Case and
Action)
Packets originating from Fluidmesh
devices (for example: FM Racer
interface)
Signalling traffic
Tagged with valid VID (1 – 4095), not
NVID
Tagged with null VID (0) or NVID
Access port rules for incoming packets with unit in Bridge Mode (Case and
Action)
The Native VLAN enable setting is used to control whether the Management VLAN
should be tagged or not.
Untagged packet, to remote devices
Tagged packet (any VID), to remote
devices
Untagged packet, to local unit kernel
© 2020 Cisco and/or its affiliates. All rights reserved.
Parameter
Default value
All other traffic
Packet passed
Packet passed
Packet passed
Packet tagged with specified VID
Packet dropped
Packet dropped
Packet passed
Packet passed
Packet passed
Packet dropped
Packet dropped
If native VLAN = ON: Packet passed
(tagged with NVID)
If native VLAN = OFF: Packet dropped
Packet passed with original tag
Packet implicitly tagged with MVID, next
rules apply
Packet implicitly tagged with MVID, next
rules apply
Packet passed (tagged)
Packet passed (untagged)
Pass packet to remote peer
Pass packet to remote peer with original
tag
If native VLAN = ON: Packet passed to
kernel, tagged with NVID
If native VLAN = OFF: Packet not
passed to kernel
Page 117 of 177

Advertisement

Table of Contents
loading

Table of Contents