Cisco FLUIDMESH FM3200 Endo Installation And Configuration Manual page 150

Backhaul FM3200 Endo Cisco Ultra-Reliable Wireless
2. Click the red REMOVE link to the right of the correct plug-in
listing.
• The web browser will inform you that deactivating the plug-
3. Confirm the deactivation.
• The unit will reboot.
• The Deactivation code for the plug-in will be shown to the
4. Make a note of the Deactivation code.
5. Log on to the Fluidmesh Partner Portal.
6. Click the Plug-ins link.
• The Plug-ins web page will be shown
© 2020 Cisco and/or its affiliates. All rights reserved.
Figure 66. Configurator interface (MANAGE PLUG-INS
dialog)
in will reboot the unit, and ask for confirmation that you
want to deactivate.
right of the plug-in listing, in the Plug-in Deactivation
Codes section (see below).
Figure 67. MANAGE PLUG-INS DIALOG (Plug-in
Deactivation Codes section)
151)).
(Figure 68 (page
Page 150 of 177