Cisco FLUIDMESH FM3200 Endo Installation And Configuration Manual page 111

Backhaul FM3200 Endo Cisco Ultra-Reliable Wireless
3. Choose the RADIUS mode for the device by clicking the RADIUS
Mode drop-down and selecting one of the following options:
• Disabled: RADIUS functionality will be disabled.
• Enabled: RADIUS functionality will be enabled, and the
• Passthrough: If the device is a trackside-mounted Fluidity
4. Enter the IP address or host name of the RADIUS server in the IP
address / hostname field.
5. By default, the RADIUS port number is 1812. Do not change the
port number unless there is a specific need to do so.
6. Enter the RADIUS access password in the Secret field. To read
the password as it is typed, check the show check-box.
© 2020 Cisco and/or its affiliates. All rights reserved.
Figure 44. Configurator GUI (RADIUS dialog)
configuration options will be shown.
device, this parameter can be used to simultaneously
activate RADIUS device authentication, and enable
RADIUS passthrough (communication between RADIUS-
authenticated vehicle-mounted devices and non-
authenticated trackside-mounted devices).
Page 111 of 177