Lubrication - Mec 1330SE Operator's Manual

Section 9 - Maintenance
Operator may perform routine maintenance only. Lubrication listed as Scheduled Maintenance must
be performed by a qualified service technician.
No. Item
1 Hydraulic Reservoir
Hydraulic Cap
2
Breather Filter
Page 29

Lubrication

Component
Tray
Specification
Mobile Fluid DTE 10, DTE 13 M, or AW32
Do not substitute other fluids as pump
damage may result.
Fill to the middle of the dipstick with
platform in the stowed position.
Breather Filter
(Located inside Filler Cap)
1330SE - Operator's Manual
FULL
ADD
Hydraulic
Unit
ART_5000
Routine Maintenance
Check hydraulic oil level every week
Scheduled Maintenance
Change yearly or every 600 hours,
whichever occurs first
Scheduled Maintenance
Normal Conditions
Change every six months or 300 hours,
whichever occurs first
Severe Conditions--very dusty,
exceptionally hot or exceptionally cold
conditions
Change every three months or 150 hours,
whichever occurs first
June 2023
Frequency