Mec 1330SE Operator's Manual page 23

Section 7 - Operating Instructions & Functions Test
Operation from Ground
Drive and steer functions are not available from the ground controls.
1. Turn the Key Switch to ground control.
2. Set the red Emergency Stop buttons to the ON position at both the ground
and platform controls.
3. Be sure the battery pack is connected before operating the machine.
To Position Platform
Move the up/down toggle switch according to the markings on the control panel.
Operation from Platform
1. Turn the Key Switch to platform control.
2. Set the red Emergency Stop buttons to the ON position at both the ground
and platform controls.
3. Be sure the battery pack is connected before operating the machine.
To Position Platform
1. Press the lift function select button.
2. Press and hold the Function Enable Switch on the control handle.
3. Move the control handle according to the markings on the control panel.
Page 20
Check the area above and around the machine for obstructions and
electrical power lines before operating the machine.
Check the area above and around the machine for obstructions and
electrical power lines before operating the machine.
1330SE - Operator's Manual
June 2023
ART_4987
ART_4988
ART_4989
Control Handle
Function
Enable
ART_5020