Wacker Neuson DPU 6555He Operator's Manual page 33

T01006GB.fm
* Slowly turn the safety starting crank counter-clockwise until the
ratchet engages. Then start turning the handle with force and with
ever increasing speed. The highest possible turning speed must
have been reached when the decompression lever reaches position
"e" (compression).
Pull the safety start crank out of the protective hood once the engine
has started.
The friction (non-positive) connection between engine and safety
starting crank must be guaranteed by a firm grip on the handle pipe
and rapid turning of the crank and must not be interrupted under any
circumstances during the starting operation.
The connection between the crank web (g) and the crank claw will be
released if - due to a hesitant turning of the handle - a return kick
should take place during the starting operation.
33
Operation