Wacker Neuson DPU 6555He Operator's Manual page 17

DPU
Working on the battery
Always take the following safety measures when working with the battery:
Assembling safety devices
If it was necessary to dismantle safety devices, they must be reassembled and
checked immediately after completing maintenance work.
Always tighten loosened screw connections, complying with prescribed starting
torque.
Handling operating fluids safely
Observe the following points when handling operating fluids, e.g. fuels, oils,
greases, coolants etc.:
No fire, sparks, or smoking while working with batteries.
Batteries contain corrosive acid. Use acid-proof protective gloves and protec-
tive goggles when working with batteries.
Avoid short circuits due to improper connection or bypassing with tools.
Disconnect the negative terminal first when disconnecting the battery.
Connect the positive terminal first when connecting the battery.
Re-fasten terminal covers after connecting the battery.
Always wear personal safety clothing.
Avoid skin and eye contact with operating fluids.
Do not inhale or swallow operating fluids.
In particular, avoid contact with hot operating fluids. Burn and scalding haz-
ard.
Dispose of replaced or spilled operating fluids according to the applicable
regulations for environmental protection.
If operating fluids escape from the machine, cease operation of the machine
and have it repaired immediately by your Wacker Neuson representative.
Operator's manual
2 Safety
17