Flashforge Adventurer 4 Quick Start Manual page 4

• Printed models should never be exposed to any type of heat, such as that
emitted by cookers, ovens, fires and candles.
• Turn off the product and unplug it from the wall socket immediately if:
- the product begins to emits smoke or smells burnt
- the product emits unusual sounds
- metal or any types of liquid comes into contact with the product
- there is a possible risk of thunderstorms
- there is a power cut
• This product contains moving parts that can cause personal injury and parts
which reach temperatures of 200−300 °C.
Keep all parts of your body away from the printing area when the product is in
operation. Never touch the print head while printing is in progress.
• Let the product cool down completely after use before handling it.
• Never attempt to bypass any safety mechanisms that prevent user access to
the printing area and print head.
• Printed models are extremely hot after being printed. Always let the models
cool before they are handled.
• Never leave the product unattended while it is operating.
• Never let children play with the product. Never let children use the product
without adult supervision. Adult supervision is always required in order to
ensure safe operation.
• Keep all models out of the hands of small children. Models pose a choking hazard.
• Printed models should never be used for food storage.
• Printed models should never be used for electrical installation purposes.
• Never print models that might break laws or regulations in the area where
the product is used.
Warning: Hot surfaces
Warning: Crush hazard
Warning: Electric shock hazard
4