Replacing The Nozzle - Flashforge Adventurer 4 Quick Start Manual

Replacing the nozzle

1. Press Prepare 2. Press Filament
5. Switch off the power to the printer and let it cool.
6. Press in both the clips and pull the
nozzle downwards. (use a pair of
pliers if you have difficulty).
Refer to the instructions on YouTube
Search for − Adventurer 4 nozzle disassemble.
3. Press Change 4. The extruder will
Clip
7. Fit a new extruder nozzle by
11
heat up. Once
the extruder
has heated up,
the filament will
automatically be
feed out.
pressing in the locking clips and
pushing the nozzle upwards.