Advertisement
Available languages
Available languages
3D Printer Quickstart guide
Art.no 38-8923 Model ADVENTURER 4
Please read the entire instruction manual before using the product and then
save it for future reference. We reserve the right for any errors in text or images
and any necessary changes made to technical data. In the event of technical
problems or other queries, please contact our Customer Services (see address
details on the back).
Safety
Follow the safety guidelines below. Make sure that you have read and
understood all the safety instructions and warnings in any other documents
included with this product and its accessories.
• Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
• Never use the product in areas where explosive gases or liquids are stored.
• Never use the product when you are tired, sick, under the influence of alcohol
or medicine.
• Always unplug the mains lead when moving the product for service or maintenance.
• If extension leads are used, ensure that they are designed for the purpose for
which they are intended to be used.
• Only use earthed power points with a voltage rating which correspond to
the specifications listed on the rating plate of the product.
• Do not place the mains lead where it can be crushed or damaged by sharp edges.
• Never use the product if it or the mains lead is damaged in any way.
• Never try to open the housing or try to repair the product in any way.
The product contains no user-serviceable parts.
• Never attempt to tamper with or modify the product in any way.
• Do not place the product where it is exposed to moisture or affected by water
or any other types of liquids. Avoid exposing the product to direct sunlight,
dust or extremely cold or hot environments. The product is designed to
function optimally in temperatures of 15−25 °C (59−77 °F) and at a humidity
level of 20−50 %.
• Tie back any long hair and ensure that no loose clothing or jewellery risks
coming into contact with any moving or hot parts of the product.
• Place the product on a stable, even surface and at a safe distance from all
flammable materials.
• Never store or place metal objects or any type of liquids within the printing
area or on top of the product. Doing so could lead to fire, electric shock or
other personal injury.
• Only operate the product in well-ventilated areas.
3
Advertisement
