Table of Contents
Advertisement
Updating firmware of the tag
• Run the mobile app Pandora Specialist.
• Press and hold the button on the radio tag until the 10th flash of the
indicator, then release the button.
• Select the found device in the app and select one of the update option:
INTERNET – firmware will be uploaded by an internet connection. FILE
MANAGER – firmware will be uploaded from the phone storage (only for
Android).
12
PANDORA MINI V4 CAR SERVICE-SECURITY SYSTEM
MOBILE APPLICATIONS
SEND
The mobile application Pandora Connect for Android and iOS devices is a ser-
vice application to control and manage the system state via the Bluetooth con-
nection. The mobile device must be paired with the system (see the "Installing
the app" section).
Note! t
Installing the app
Download the mobile app from your device's app store:
• App Store (iOS);
• Google Play (Android).
Enter the system programming mode and pair your phone with the system
Enter the system programming mode after installing the app and make the
pairing procedure.
Pairing a mobile device
To pair a mobile device:
I. ENTER THE PROGRAMMING MODE
To enter the programming mode, enter the "Service PIN-code" using the
VALET button (factory pre-set is "1-1-1-1"). Entering the "Service PIN-code" (see
the "Control over the system in case of emergency" section).
II. ENTER THE "PAIRING A MOBILE DEVICE" PROGRAMMING LEVEL
Press and hold the VALET button for 5 seconds until the fifth sound signal
of the beeper or the fifth orange flash of the LED). Release the button after the
fifth sound signal. The system will enter the "Pairing a mobile device" program-
ming level. The LED indicator will light green after entering the level, it means
the system is ready for pairing.
III. PAIR A MOBILE DEVICE
Switch on the Bluetooth on your phone. Run the Pandora Connect app and
go to the "Settings->Bluetooth control->Bluetooth devices" screen. The appli-
cation will search for the system via a Bluetooth connection. Select the found
system ("Pair"), the system and the mobile device will be automatically paired.
It will be confirmed with a sound signal of a siren and red and green flashes of
the LED indicator.
USER MANUAL
he system suppoRts oNly oNe mobIle devIce
13
Advertisement
Table of Contents
