Table of Contents
Advertisement
Note! s
"I
"
ee the
NfoRmAtIoN
sectIoN foR descRIptIoN of sIGNAls INdIcAtING the
NumbeR of RecoRded coNtRol devIces
Pandora Specialist
The Pandora Specialist allows configuring the main parameters of the sys-
tem, uploading firmware updates, downloading installation guides, making
the "Pandora CLONE" procedure.
In preparation to programming, these stages should be followed:
• Install the Pandora Specialist to a PC with Windows (64-bit only) or a
smartphone;
• Start the Pandora Specialist;
• Connect the system and PC via a USB cable;
• Enter the programming mode by entering the service PIN-code;
• The application will automatically open the settings window.
It is recommended to update firmware of the base unit before installing and
programming the system (actual version of the firmware you can download
from pandorainfo.com or from the Pandora Specialist). You can update firmware
using the Pandora Specialist application after entering the programming mode:
• Press the "Update software" button and select a type of updating;
• "Load from file" – select previously downloaded firmware on your PC, "Firm-
ware archive" - firmware will be downloaded from a server to the "firm-
wares" folder.
• Select a firmware file and press the "Update" button;
Exit the programming mode after changing the settings or updating firmware.
Note! I
f AN updAtING pRocess hAs beeN INteRRupted foR some ReAsoN ANd the
,
stAtus INdIcAtoR lIGhts Red
you Need to use the
. o
A
s
fIRmWARe
peN the
lARm
tudIo
vAlet
ANd hold the
buttoN locAted oN the bAse uNIt
medIAtely AfteR coNNectING the system ANd A computeR vIA
.
WIll eNteR the boot mode
30
PANDORA MINI V4 CAR SERVICE-SECURITY SYSTEM
"q
"
uIck boot mode
to uploAd
;
-
;
de
eNeRGIze ANd dIscoNNect the system
pRess
;
ReleAse the buttoN Im
usb
;
cAble
the system
Programming menu
Enter the programming mode, enter the "Service PIN-code" (default value is
1-1-1-1), the system will wait for level input – "Level 0 Entering a level". Enter
a desired level using the VALET button (see the "Programming levels table")
to change settings or parameters. . The system will confirm correct input with
red LED flashes and short sound signals of the siren/beeper and proceed to
the desired level.
AN EXAMPLE
• To enter a level ("Level №1...№17"), press (P) the VALET button the number
of times equals to the desired level number (1...17), pauses between press-
es should not exceed 1 second. The system will confirm correct input with
red LED flashes and short sound signals of the siren/beeper and proceed
to the desired level. To enter a sublevel or a cell of sublevel make a pause
for more than 1 second (), then press (P) the VALET button the number of
times equals to the desired sublevel or cell number.
• For quick access to the higher level, press and hold (H) the VALET button.
The siren will sounds tone beeps (up to 10). These sounds means the se-
quence number of a two-digit level number (the first signal – level №10, the
fifth signal – level №50, the tenth signal – level №100). Release the VALET
button immediately after the desired number of signal. To enter an interme-
diate level (Level №11...№17), press the VALET button the number of times
equals to the second digit (1...7) of the desired level number immediately
after releasing the button. The system will confirm correct input with red
LED flashes and short sound signals of the siren/beeper and proceed to the
desired level.
-
USER MANUAL
31
Advertisement
Table of Contents
