System set
Base unit
Immobilizer tag
Blocking relay
Cable with VALET button
User installation manual
Personal owner's card
Beeper (compact sound emitter)
Main cable
Fastening kit
Packaging
m
ANufActuReR ReseRves the RIGht to chANGe set ANd coNstRuctIoN of the pRod
uct to ImpRove Its techNoloGIcAl ANd opeRAtIoNAl pARAmeteRs WIthout NotIfIcA
.
tIoN
4
PANDORA MINI V4 CAR SERVICE-SECURITY SYSTEM
SYSTEM FEATURES
Base unit
1
2
• Integrated 2.4 GHz module with support of Bluetooth 5.0
1
• Built-in integral accelerometer for determining motion/shock/tilt with
1
adaptive processing algorithm and sensitivity controls
1
Built-in micro-USB port
1
• Integrated temperature sensor (interior temperature)
1
• Dialog coding of control commands with 128-bit encryption keys (a key is
1
changed each time an additional device is recorded)
1
• Individual "Secret PIN-code", changeable "Service PIN-code" and "Immobi-
1
lizer PIN-code"
Control and monitoring
Control of the vehicles zones depends on the type of connection and system
-
-
settings, original car operation and trim.
Analog connection – It is a direct connection of analog inputs and outputs
to electrical circuits of a vehicle in accordance with a connection diagram.
Digital connection – It is a connection to digital (CAN) buses. It allows
reading information (statuses) and controlling vehicles (commands) by digital
buses of the vehicles. The detailed information about digital protocols is avail-
able on loader.pandorainfo.com. The declared statuses may not be available
for certain vehicle trims.
Built-in sensors – These sensors are integrated in the base unit. The sensors
perform control and protection of the vehicle. Additional connections are not
required
Additional sensor (*optional) – External additional sensors are connected
to the base unit.
USER MANUAL
5