Table of Contents

Advertisement

VALET button
Press and hold the VALET button for 3 seconds. The system will be armed in 30
seconds. The LED indicator is lighting red during the countdown.
There is an option in the system settings that allows to arm the system
with disabled sensors (shock/tilt/motion and additional sensors). The setting
"Switch off sensors when arming using VALET button" is available in the Pan-
dora Specialist.

Disarming

To disarm the system, use one of the methods described below. The system
will confirm the command receiving with 2 short sound signal and 2 flash of
turn indicators.
If there were alarm events during the arming period, siren will sound 4
times and turn signals will flash 4 times.
SLAVE
HANDS FREE
MOBILE APP
WARNING! I
t Is RecommeNded to use the
hIbIt dIsARmING WheN the tAG Is AbseNt
.
pRotectIoN
SLAVE mode
This mode allows disarming using special analog inputs or digital connections
to a car.
To disarm the system, shortly press the "Unlock" button on an original re-
mote control or use a sensor/button on a door handle (for cars with an intel-
ligent access system).
Note! A
ddItIoNAl settINGs oR coNNectIoNs ARe RequIRed foR thIs mode
18
PANDORA MINI V4 CAR SERVICE-SECURITY SYSTEM
2x
Doors are unlocking
2 ashes
System is disarming
2 ashes
"I
"
"p
-
mmobIlIzeR mode
ANd
Ro
"
-
fuNctIoN to INcReAse ANtI
theft
..
Mobile application
Open the mobile application. When the system is active, press and hold the
button
on the control panel until the scale is fully loaded.
Radio tag
A radio tag must be in the Bluetooth coverage area. Shortly press the control
button on the tag.
HandsFree mode
Move toward the vehicle with a remote tag (or a paired mobile phone)
Note! A
ddItIoNAl settINGs ARe RequIRed foR usING the
.
A mobIle phoNe
VALET button
Enter the "Secret PIN-code" (see the "Emergency disarming using the VALET
button" section).
USER MANUAL
.
h
f
ANds
Ree mode WIth
19

Advertisement

Table of Contents
loading

Table of Contents