SYSTEM POWER SETTINGS
•The cooktop must be connected to the power supply for max. 1 minute.
•The cooktop must be switched OFF.
•Press simultaneously anywhere on the left region and on the right region in the lower half area of the display for 2 seconds.
•Values starting from 2.4kW up to 11.0 kW in 100W steps can be chosen.
•Select the power level with the selection wheel and save with the confirm button.
TECHNICAL INFORMATION
MODEL
SUPPLY VOLTAGE
SUPPLY FREQUENCY
COOKING AREA
TOTAL POWER
4.3.2
Pot Programs
EC ELECTRIC COOKING
The pot program menu contains various functions for the preparation of food.
ENERGY CONSUMPTION
FOR THE HOB [Wh/kg]
E
NTERING THE POT PROGRAM MENU
NOMINAL POWER
Precondition
Cooktop is ON. Pot is placed on the cooktop.
BOOSTER POWER
Select the required pot by touching inside the pot icon
4.3.2
Pot Programs
The pot program menu contains various functions for the preparation of food.
E
NTERING THE POT PROGRAM MENU
The pot gets in selection mode
Precondition
Select the knife and fork icon of the pot
Cooktop is ON. Pot is placed on the cooktop.
Select the required pot by touching inside the pot icon
7300 000
220-240 V 1N
380-415 V 3N
technical customer documentation
50 / 60 Hz
company: 0083 / E.G.O. Germany (E.G.O. Elektro-Gerätebau GmbH)
870 x 384 mm
L
EAVING THE
11000 W
Pot Program can be exited
179,6 Wh/kg
by touching the X icon
by the expiry of timeout counter
by touching the area above the pot program menu.
2600 W
3650 W
M
ELTING FUNCTION
The melting function is especially used for melting chocolate. The func
induction coil sensor to 44°C.
A
CTIVATION OF THE MELTING FUNCTION
Precondition
Cooktop is ON. Pot is placed on the cooktop and pot program menu is
Select the chocolate icon
Note
technical customer documentation
7
company: 0083 / E.G.O. Germany (E.G.O. Elektro-Gerätebau GmbH)
P
P
OT
ROGRAMS
In most cases, the symbols / icons are displayed inve