Cooking Timer - Foster 7300000 Use And Installation Manual

COOKING TIMER

•Pot timers can be used to switch OFF a pot automatically after the set time has run out.
•While the timer is running, the cooking zone can be operated normally (i.e. cooking level can be changed).
•Each pot has an independent timer. All pot timers can run in parallel.
•Select the required pot by touching inside the pot icon and select the clock icon of the pot.
•Adjust the numbers for the timer on the hours and minute wheels, then confirm the setting on the confirm icon.
page 34 of 113
 Confirm the setting on the confirm icon
 Lift pot
 Pot is displayed as lifted. Pot information remains in the display for approx. 20 seconds
 Active pot timer is paused
•The timer starts counting backwards. Beneath 1 hour, the display shows the current time accurate to the second.
 Confirm the setting on the confirm icon
•If the timer expired, a signal tone will be emitted, and the timer numbers are highlighted and flashing.
 The pot timer menu is left
•The cooking level is switched off.
 The timer starts counting backwards. Beneath 1 hour, the display shows the current time accurate to
•Confirm the timer by touching the flashing timer values or by removing the pot or by waiting 35 seconds.
the second.
CHANGING THE VALUE AND DE-ACTIVATION
 Replace pot on the cooktop
•Touch the pot timer values on the pot display.
 All pot settings are reset automatically
page 37 of 113
 The pot timer menu is left
 The timer starts counting backwards. Beneath 1 hour, the display shows the current time accurate to
 If the timer expired, a signal tone will be emitted, and the timer numbers are highlighted and flashing
the second.
 The cooking level is switched off
 Confirm the timer by touching the flashing timer values or by removing the pot
 The signal tone stops, and the clock icon is displayed on the pot again
•To change the value adjust the numbers for the timer on the number wheels and confirm by touching the tick icon.
•To deactivate the timer touch the reset icon or set timer values to 00:00 and confirm by touching the tick icon.
If the pot is not replaced on the cooktop within 20 seconds, the pot display is removed.
Notes
If a new pot is placed in area of a lifted pot, this pot is deleted.
Unsuitable Pot Material
Generally, two selection modes are possible:
Direct Selection:
The selection is done by touching directly on the desired cooking level number.

Sliding:
 The selection is done by wiping with the finger from the left side to the right or vice versa.
The power level slider is visible if a pot is in selection mode.
document id.: 90.60113.039-001-08-A / state: 120 - at review
designation: Lumio customer documentation
4.2.12 Pot Lifting
If a pot is lifted by the user, the induction keeps the pot information for
the user can replace the pot and all pot settings are reset automaticall
 Lift pot
 Pot is displayed as lifted. Pot information remains in the displa
 Active pot timer is paused
 Replace pot on the cooktop
 All pot settings are reset automatically
technical customer documentation
document id.: 90.60113.039-001-08-A / state: 120 - at review
company: 0083 / E.G.O. Germany (E.G.O. Elektro-Gerätebau GmbH)
designation: Lumio customer documentation
If the pot is not replaced on the cooktop within 20 seconds
Notes
If a new pot is placed in area of a lifted pot, this pot is dele
technical customer documentation
company: 0083 / E.G.O. Germany (E.G.O. Elektro-Gerätebau GmbH)
 Confirm the setting on the confirm icon
 Confirm the setting on the confirm icon
 The pot timer menu is left
 The timer starts counting backwards. Beneath 1 hour, the disp
the second.
2 1 3
technical customer documentation
document id.: 90.60113.039-001-08-A / state: 120 - at rev
designation: Lumio customer documentation
page 28 of 113
pag