Boost Function - Foster 7300000 Use And Installation Manual

BOOST FUNCTION

•The booster enables the induction to provide a higher power for a pot for a short period of time (10 min).
•This is useful to heat-up/boil a big amount of water
As the booster function may reach high temperatures, it must only be used for cooking
processes using water. Oil or fat may start to burn if booster is used.
Shortcut switch OFF pot
DE-ACTIVATION OF THE BOOSTER
 Double tap on pot icon
 Pot is selected and is then switched OFF.
•Select any other cooking level for the pot by slider if the booster function is currently active.
•Deactivate boost function by activation of a pot program.
•Deactivation by induction system due to temperature or power management.
Power level slider
•The boost function is terminated and deactivated automatically after boost - time of 10 min. Power level 9 is set, and
sound emitted.
•The boost function can be reactivated after expiration of the boost time if the temperature conditions allow it.
POT PROGRAMS
The selection is done by touching directly on the desired cooking level number.

•The pot program menu contains various functions for the preparation of food.
•To enter the menu select the required pot by touching inside the pot icon.
 The selection is done by wiping with the finger from the left side to the right or vice versa.
•Select the knife and fork icon of the pot.
•The pot program menu opens
•Pot Program can be exited:
-by touching the X icon
-by touching the area above the pot program menu
-by the expiry of timeout counter
period of time (10 min for Area induction). This is useful to heat-up/boil a big amount of water.
As the booster function may reach high temperatures, it must only be used for cooking
Note
processes using water. Oil or fat may start to burn if booster is used.
A B
CTIVATION OF THE OOSTER
Precondition
Cooktop is switched ON. Pot is placed on the cooktop and pot is in selection mode.
 Select booster level on the slider (e.g., shown as "B" or "P")
 The booster for the selected cooking zone is activated. The display for the pot shows a boos
 The requested power level 2.5 is set and displayed in the pot and slider
document id.: 90.60113.039-001-08-A / state: 120 - at review
designation: Lumio customer documentation
technical customer documentation
company: 0083 / E.G.O. Germany (E.G.O. Elektro-Gerätebau GmbH)
4.3.2 Pot Programs
The pot program menu contains various functions for the preparation
E
NTERING THE POT PROGRAM MENU
Precondition
Cooktop is ON. Pot is placed on the cooktop.
 Select the required pot by touching inside the pot icon
 The pot gets in selection mode
document id.: 90.60113.039-001-08-A / state: 120 - at review
 Select the knife and fork icon of the pot
designation: Lumio customer documentation
document id.: 90.60113.039-001-08-A / state: 120 - at review
designation: Lumio customer documentation
 The pot program menu opens
11
Tap to activate
B
document id.: 90.60113.039-001-08-A / state: 120 - at re
designation: Lumio customer documentation
page 22 of 113
pa
pa