Carry out the following steps:
1.
2.
430BAL011665EN_5
21.03.2023
Notice
The permanent magnet on the switch bar is fragile.
Damage to the permanent magnet.
► Protect the permanent magnet against impact stress.
Remove the clamps (R) between control top and actuator.
Pull off the control top (B) upwards.
The control top has been taken off.
Hint!
For further information regarding the control top please refer to the
Operating Instructions "Control Top T.VIS P-15".
Maintenance
Disassembly
51
Need help?
Do you have a question about the VARIVENT and is the answer not in the manual?