Table of Contents
Advertisement
Table 6. User Settings (Continued)
Submenu
High Efficiency
mode
Bypass transfer
Overload
prealarm
Redundancy
mode
Cold Start
Forced reboot
Auto restart
Auto start
On/Off
Settings
Energy Saving
Sleep mode
Remote
Command
Bypass standby
Low battery
warning
Battery
settings
Restart bat.
level
Available Settings
[Enabled] [Disabled] Power the output from Bypass for high efficiency
[Transfer if BP AC NOK]
[Enabled] [Disabled]
Allow transfer on Bypass out of tolerance
[10%] ... [102%]
Load % when overload alarm occurs
[Unitary UPS] [Hot Standby]
Force slew rate value to 0.5Hz/s
[Enabled] [Disabled]
Authorize the product to start on battery power.
[Enabled] [Disabled]
If mains recover during a shutdown sequence:
If set to Enabled, shutdown sequence will complete and wait 10
seconds prior to restart, If set to Disabled, shutdown sequence will
not complete and restart will occur immediately.
[Enabled] [Disabled]
Authorize the product to restart automatically when mains recovers
after a complete battery discharge.
[Enabled] [Disabled]
The UPS automatically starts up as soon as mains power is available
(no need to press the
button).
[Disabled] [100W] ... [1000W]
If Enabled, UPS will shutdown after 5 min. of back-up time, if load is
less than threshold.
[Enabled] [Disabled]
If Disabled, LCD and communication will turn OFF immediately after
UPS is OFF.
If Enabled, LCD and communication stays ON 1h30 min after UPS is
OFF.
[Enabled] [Disabled]
If Enabled, shutdown or restart commands from software are
authorized.
[Enabled] [Disabled]
Define if output is powered from Bypass in Standby mode.
[Capacity] [0%] ... [100%]
The alarm triggers when the set percentage of battery capacity or
remaining back-up time is reached.
[0%] ... [100%]
If set, automatic restart will occur only when percentage of battery
charge is reached.
Eaton 9PX Lithium-Ion User Guide DPD-9PX2205—Rev 01
User Settings
Default settings
[Disabled]
[Enabled]
[102%]
Unitary UPS
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[20%]
[0%]
9
Advertisement
Table of Contents
