Table of Contents
Advertisement
Hook the hood body
Hook the hood body to the bracket 20.
Level the hood body itself.
Lock screws (M5*12) on the hood fixing bracket to prevent the hood body from accidently
sliding off . Remove the filter,from the inside of the hood body, fix the screws 10 to
Wall Plugs 11 at the points (3)(solution2).
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
using either a flexible or rigid pipe ɸ 150 or ɸ 120 mm, the choice of
which is left to the installer.
If to install a ɸ 120 mm air exhaust connection, insert the reducer
flange 3 on the hood body outlet.
Fix the pipe 4 in position using sufficient pipe clamps (not supplied).
Remove possible charcoal filters.
CHIMNEY ASSEMBLY
The chimney can only be installed with exhausting hood.
Lower Decorative Chimney
Fix a Chimney fixing bracket 21 onto the Lower Decorative Chimney with 2 screws 12
(4.2x 9.5) supplied with the hood.
Upper Decorative Chimney
Insert the upper decorative chimney 2.2 into the lower decorative chimney 2.1 and drag it up
to the bracket 21.
Fix the upper chimney onto the bracket 21 with 2 screws 12 (4.2 x 9.5) supplied with the hood.
21
2.1
12
Right
Wrong
6
Advertisement
Table of Contents
