Titan Mobility Scooter - MS03039
10
4. Operation
4.1 Control panel
1.
Speed Dial
2.
Horn Button
3.
Indicator lamp switch
4.
Head light / Rear Light Button
5.
Battery Indicator
6.
Emergency lamp switch
7.
Indoor/Outdoor switch
4.2 How to operate your scooter
Power switch
Turn the key to power ON or OFF
On:
Power is turned on
Off:
Power is turned off
Speed dial
Turn this dial to determine to the speed range of the scooter. Turn the dial anti-clockwise to go slower and
clockwise to go faster.
Forward, Reverse, and Braking
•
Push the speed control lever forwards with your right thumb and the vehicle will move forward.
•
Push the speed control lever forwards with your left thumb and the vehicle will move backward.
•
The horn will beep when the vehicle is in reverse.
•
Release the speed control lever freely while either going forward or reverse, and the electromagnetic brake in
the motor will be activated, and the vehicle will stop.
Indicator Lamp Switch
•
The light will flash and buzzer will make a beeping sound when turning the switch to the left or right.
•
Return the switch back to the middle, and the indicator will be cancelled.
Horn Button
Press the horn button to sound the horn. Release the button to stop the horn.
Light Button
Push the light button to switch the front and rear lights on.
Push the button again to turn the lights off.
Battery Indicator
•
When the power switch is turned on the battery indicator will show red, yellow, and green squares indicating
the remaining battery power.
•
The remaining power indicated by the battery indicator will vary by the actual driving time incurred and how
you drive. Repeated starting, stopping, climbing will consume the power more quickly.
www.careco.co.uk
5
7
1
4
CareCo, Hubert Road, Brentwood, Essex, CM14 4JE
6
2
3