Table of Contents
Advertisement
Planning
WARNING
Ensure weight of wall above is
NOT carried by the appliance.
Combustible
material
allowed on
front wall
16-1/2"
(419 mm)
Non-combustible
material on front
wall
Horizontal surfaces (hearth
17"
& overhang) within this zone
(432 mm)
MUST be constructed of
between
non-combustible material if
finished
within 9" (229 mm) of
materials
appliance perimeter.
Combustible
material
allowed on
front wall
16
Framing—Extended
HeatShift plenum or duct plates framing
required (top, front or sides); see instructions
packed with HeatShift kit.
Steel framing. Ensure
suitably braced to suppor
weight of wall. Ensure
weight of wall above is
NOT carried by appliance
Combustible material
allowed on rear wall if
framed forward up to
flanged opening.
Combustible construction
with plywood base below
appliance is okay.
Advertisement
Table of Contents
