Connecting The Pressure Washer To The Power Supply; Switching The Pressure Washer On And Off; Operating The Pressure Washer - Stihl RE 100.0 PLUS CONTROL Instruction Manual

8 Connecting the pressure washer to the power supply

8 Connecting the pressure
washer to the power supply
8.1 Connecting the pressure
washer to an electric power
supply
3
2
3
► Set the toggle switch to the 0 position.
► Remove the connecting cord (2) from the hold‐
ers (3).
► Plug the plug of the connecting cord into a cor‐
rectly installed socket.
9 Switching the pressure
washer on and off
9.1 Switch on high-pressure
washer
When the pressure washer is switched on, volt‐
age fluctuations may occur under unfavorable
mains conditions. The voltage fluctuations may
negatively affect other connected electrical appli‐
ances.
► Set the rocker switch to position I.
0458-004-0121-B
9.2
1
► Set the toggle switch to the 0 position.
10 Operating the pressure
10.1
► Hold the spray gun by the handle with one
hand, wrapping your thumb around the han‐
dle.
► Hold the spray lance firmly with your other
hand, wrapping your thumb around the spray
lance.
► Point the nozzle at the ground.
10.2
Switching off the pressure
washer.
washer
Holding and controlling the
spray gun
Unrolling the high-pressure
hose
English
1
15