Stihl RE 100.0 PLUS CONTROL Instruction Manual page 16

English
WARNING
■ When the lever of the spray gun is released, a
recoil occurs in the high-pressure hose. A
recoil expands the high-pressure hose. If the
high-pressure hose is not completely unwound
from the hose reel, there is no room for the
high-pressure hose to expand and the high-
pressure hose may be damaged. Water can
escape uncontrollably into the environment at
high pressure. This may result in serious injury
to people and damage to property.
► Completely unroll high-pressure hose.
► Completely unroll high-pressure hose (1).
10.3 Squeezing and locking the
spray gun trigger
Pressing the spray gun trigger
► Move the retaining latch (1) to the
► Press and hold the trigger (2).
The high-pressure pump starts up automati‐
cally and water flows out of the nozzle.
Locking the spray gun trigger
► Release the trigger (2).
The high-pressure pump switches off automat‐
ically and water stops flowing out of the noz‐
zle. The high-pressure washer is still switched
on.
► Move the retaining latch (1) to the
10.4 Settng the working pressure
Depending on the application, 3 power levels
can be set. The LEDs "POWER LEVEL" indicate
16
the selected power level. The higher the power
level, the higher the working pressure.
Work can be carried out with high working pres‐
sure if stubborn dirt is to be removed.
Low working pressure can be used when remov‐
ing soiling from sensitive surfaces.
► Switch on high-pressure washer.
► Press activation key (1).
The activation key (1), the "BATTERY INDI‐
CATION" LED (2) and the "POWER LEVEL"
2
LED (3) light up green: The working pressure
1
can be set.
► Press the button (4).
This selects the next power level. After the
third performance level, it starts again with the
first performance level.
► Press pushbutton (4) repeatedly until the
desired power level is set
The control panel switches off automatically after
position.
5 minutes as soon as the pressure washer is
switched off.
10.5
2
1
The 3-in 1 nozzle can be set according to the
application:
– The fan-jet nozzle
light and medium soiling.
– The rotary nozzle
stubborn dirt on insensitive surfaces.
position.
– The spray nozzle
with detergent.
► Before cleaning, point the water jet at an
inconspicuous spot on the surface and
check that the surface is not damaged.
10 Operating the pressure washer
1
Cleaning
is suitable for cleaning
is suitable for cleaning
is suitable for cleaning
2
3
4
0458-004-0121-B