Rear turn signals
E
To change the rear turn signal bulbs, rotate the turn signal
body (1) by a quarter of a turn so that the lens is facing
upwards, and withdraw it from the support.
The bulb has a bayonet-type end fitting: to remove it, push it
in and turn it counter-clockwise. Push in the new bulb and
turn it clockwise until it clicks into place. Refit the indicator
body (3) to its support and rotate it by a quarter of a turn.
Number plate light
To access the number plate light bulb, unscrew the bolt (3)
securing the cover (4). Remove the bulb and replace it.
96
(fig. 88)
(fig. 89)
1
2
fig. 88
4
3
fig. 89