Rear turn signals
(fig. 49 and fig. 50)
2
Loosen the screw (1) and detach the lens (2) from the
turn signal light. Withdraw the bulb assembly (4) from the
bulb holder (5).
Change thw bulb and insert the bulb assembly (4) in the bulb
support (5). Riefit the lens (2) with the bulb holder (5) to the
turn signal (3), inserting the two pins on the bulb holder (5) in
the corresponding locations in the turn signal (3).
Refit and tighten the screw (1).
E
1
fig. 49
5
4
3
2
fig. 50
54