Rear turn signals
(fig. 52 and fig. 53)
Loosen the screw (1) and detach the lens (2) from the
turn signal support (3) Withdraw the bulb assembly (4)
from the bulb holder (5).
Change the bulb and insert the bulb assembly (4) in the
bulb holder (5). Refit the lens (2) with the bulb holder (5)
to the turn signal support (3), inserting the two pins on
the bulb holder (5) in the corresponding locations in the
turn signal support (3).
Refit and tighten the screw (1).
2
1
E
fig. 52
4
3
2
fig. 53
57