Table of Contents
Advertisement
The STANDARD factory settings are as follows:
compression:
E
3/4 turns (1198),
8 clicks (1198S);
rebound:
12 clicks (1198),
10 clicks (1198S).
Spring preload (1198) (A, fig. 50): 18 mm;
corresponds to an actual preload of 9 mm.
Spring preload (1198S): starting with the adjuster screwed
FULLY OUT, screw it in clockwise 8 turns;
corresponds to an actual preload of 8 mm.
To change the preload on the inner spring for each fork leg,
turn the adjuster with the hex end (2, fig. 50 and fig. 51)
with a 22 mm hex wrench.
Important
Adjust both fork legs to the same setting.
64
3
1198
1198S
fig. 52
3
fig. 53
Advertisement
Table of Contents
