Table of Contents
Advertisement
J Hook Under Truck Flange
1 — Front Of Truck
2 — J Hook
NOTE:
Make sure the bumper is in front of the truck flange bead.
Pull Handle Downward
4.
Pull down on the handle to ensure the Slide Locking
Lever is fully engaged. Do this for both the left and
right side.
5.
Unclip the stowage straps, and re-snap them to the
bow.
6.
Unfold the Tonneau Cover to the second panel
position.
Incorrect Folding — Will Cause Damage
NOTE:
When folding the second and third panels, the sections
MUST be held together to avoid damage to the cover
material. Fold the panel gently. Do not allow the panels to
drop under their own weight.
GETTING TO KNOW YOUR VEHICLE
Second Panel Position
NOTE:
Unfold the panel gently, and do not allow the panels to
drop under their own weight.
7.
Completely unfold the Tonneau Cover.
CAUTION!
The vehicle cannot be driven when the Tonneau Cover
is in the second panel position.
91
2
Advertisement
Table of Contents
