Table of Contents
Advertisement
The top tether anchorages in this vehicle are
tether strap loops located between the rear
glass and the back of the rear seat. There is a
tether strap loop located behind each seating
position. Follow the steps below to attach the tether strap
of the child restraint.
Right Or Left Outboard Seats:
1.
Reach between the rear seat and rear glass to
access the tether strap loop.
2.
Place a child restraint on the seat and adjust the
tether strap so that it will reach over the seat back,
through the space between the head restraint and
the seat back, through the tether strap loop behind
the seat and over to the tether strap loop behind the
center seat.
3.
Pass the tether strap hook through the space
between the head restraint and the seat back behind
the child seat, through the tether strap loop behind
the seat and over to the center tether strap loop.
Tether Strap Through Outboard Tether Strap Loop
4.
Attach the hook to the center tether strap loop (see
diagram). Tighten the tether strap according to the
child seat manufacturer's instructions.
Tether Strap Through Outboard Tether Strap Loop And
Attached To Center Tether Strap Loop
NOTE:
If there are child seats in both of the outboard (left and
right) seating positions, the tether strap hooks of both
child seats should be connected to the center tether strap
loop. This is the correct way to tether two outboard child
seats.
Center Seat:
1.
Reach between the rear seat and rear glass to
access the tether strap loop.
Center Tether Strap Loop Location
2.
Place a child restraint on the seat and adjust the
tether strap so that it will reach over the seat back
and headrest, through the tether strap loop behind
the seat and over to the tether strap loop behind
either the right or left outboard seat.
SAFETY
309
6
Advertisement
Table of Contents
