RAM 1500 2023 Owner's Manual page 105

Trip Info
Push and release the up or down
the Trip menu item is highlighted in the instrument cluster
display. Push and release the right or left
button to enter the submenus of Trip A and Trip B. The Trip
A or Trip B information will display the following:
 Distance
 Average Fuel Economy
 Elapsed Time
Push and hold OK button to reset all information.
Navigation — If Equipped
Push and release the up or down
the Navigation display title is highlighted in the instrument
cluster display, "Hold OK to Start Route" will display when
no active route is set. "Hold OK to Cancel Route" will
display when active route is set. Use the left
arrow button to zoom in or out on the display
Stop/Start — If Equipped
Push and release the up or down
the Stop/Start icon/title is highlighted in the instrument
cluster display. The screen will display the Stop/Start
status.
Trailer Tow — If Equipped
arrow button until Push and release the up
the Trailer Tow menu item is highlighted in the instrument
arrow cluster display. Push and release the right
arrow button to cycle through the following trailer tow
information:
 Trip (trailer specific) Distance: Push and hold the OK
button to reset the distance.
 Integrated Trailer Brake Module (ITBM):
 Braking Output
 Trailer Type
 ITBM Gain
arrow button until
 Trailer Tire Pressure Monitoring: The Instrument
Cluster Display will display the Trailer Tire Pressure for
a connected trailer with sensors that match the active
trailer profile. When a low tire is present, the low tire
or right
value will be displayed in red, and the affected low tire
page 191.
Ú will have a red glow. "Trailer Tire Low" will be displayed
on the center bottom of the Instrument Cluster Display
screen.
arrow button until
 Trailer Light Check — If Equipped: Push and hold the OK
button to begin the Trailer Light Test sequence
page 182.
Ú
GETTING TO KNOW YOUR INSTRUMENT PANEL
Audio
or down arrow button until Push and release the up
the Audio Menu icon/title is highlighted in the instrument
cluster display. This menu will display the audio source
or left
information, including the Song name, Artist name, and
audio source with an accompanying graphic.
Phone Call Status
When a call is incoming, a Phone Call Status pop-up will
display on the screen. The pop-up will remain until the
phone is answered or ignored.
NOTE:
The call status will temporarily replace the previous media
source information displayed on the screen. When the
pop-up is no longer displayed, the display will return to the
last used screen.
Stored Messages
Push and release the up
the Messages Menu item is highlighted. This feature
shows the number of stored warning messages Example:
"Oil Change Required". Push and release the right
left
or down arrow button until
or down arrow button until
arrow button to cycle through stored messages.
103
3
or