Table of Contents
Advertisement
Setting Name
Control Screen Timeout
Navigation Next Turn Pop-ups Displayed in Cluster
Phone Pop-ups Displayed In Cluster
Fuel Saver Display
Ready To Drive Pop-ups
Safety/Driving Assistance
When the Safety/Driving Assistance button is selected on the touchscreen, the system displays the options related to the vehicle's safety settings. These options will differ
depending on the features equipped on the vehicle. The settings may display in list form or within subfolders on the screen. To access a subfolder, select the desired folder; the
available options related to that feature will then display on the screen.
NOTE:
Depending on the vehicle's options, feature settings may vary.
Setting Name
Forward Collision Warning Sensitivity — Located in Automatic Emergency Braking
Submenu
Forward Collision Warning — Located in Automatic Emergency Braking Submenu
Pedestrian Emergency Braking — Located in Automatic Emergency Braking Submenu
Description
This setting allows you to set the Control Screen to turn off automatically after five
seconds or stay open until manually closed.
This setting will display navigation prompts in the Instrument Cluster Display.
This setting will display smartphone notifications and messages in the Instrument
Cluster Display.
This setting will enable fuel saver mode in the Instrument Cluster Display.
This setting will enable the Ready To Drive Pop-ups in the Instrument Cluster Display.
Description
This setting will change the distance at which the Forward Collision Warning (FCW) alert
sounds. The "Medium" setting will have the FCW system signal when an object is in view,
and the possibility of a collision is detected. The "Near" setting will have the FCW system
signal when the object is closer to the vehicle. The "Far" setting will have the FCW system
signal when an object is at a far distance from the vehicle.
This setting will turn the Forward Collision Warning system on or off. The "Off" setting will
deactivate the FCW system. The "Warning Only" setting will provide only an audible chime
when a collision is detected. The "Warning + Active Braking" setting will provide an
audible chime and apply some brake pressure when a collision is detected.
This setting will turn the Pedestrian Emergency Braking system on or off.
MULTIMEDIA
197
5
Advertisement
Table of Contents
